Positive Material Identification Procedure

POSITIVE MATERIAL IDENTIFICATION PROCEDURE

==========

POSITIVE MATERIAL IDENTIFICATION PROCEDURE

TABLE OF CONTENTS

1. Objective

2. Scope of application

3. Implementation responsabilities

4. References

5. Terminology

6. Development

7. Historical changes

8. Attachments

________________

1. OBJECTIVE

This procedure is developed to ensure that Positive Material Identification (PMI) requirements of the clients. This procedure specifies the requirement of Quality Assurance for Identification of materials during the manufacturing process.

1. SCOPE OF APPLICATION

This verification shall be performed before and after the component is installed in the equipment, in order to ensure that there have been no errors with the identification of the materials.

1. IMPLEMENTATION RESPONSABILITIES

Project Manager:

* He must assure that the qualified personnel and other resources (materials, equipment, etc.) needed for the execution of the project is available.

Quality Inspector:

* He informs the Quality Chief about any finding.

* He is responsible for the execution of this procedure and compliance with project requirements.

1. REFERENCES

2. TERMINOLOGY

* PMI (Positive material inspection):

Is the analysis of materials to determine the chemical composition of a metal or alloy at particular (usually multiple) steps of alloy manufacturing or in-process alloy installation.

1. DEVELOPMENT

1. EQUIPMENT / TOOLS TO USE

* Niton XL2 XRF Analyzer X-RAY.

1. PROCEDURE DEVELOPMENT

* Samples for chemical analysis

...